Technicial Specifications
| Gross Power (SAE J1995:2014) | 212 kW |
| Net Power (SAE J1349:2011) | 186 kW |
| Net Power (ISO 9249:2007) | 186 kW |
| Engine Power (ISO 14396:2002) | 205 kW |
| Emissions | Option 1 - U.S. EPA Tier 4 Final/EU Stage V |
| Engine Model | Cat® C7.1 |
| Rated Speed | 2200 r/min |
| Torque Rise | 52% |
| Note (1) | Net power available at flywheel when the engine is equipped with fan, air cleaner, aftertreatment, and alternator with engine speed at 2,200 rpm. |
| Emissions | Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA |
| Rated Speed | 2200 r/min |
| Net Power - ISO 9249:2007 | 186 kW |
| Gross Power - SAE J1995:2014 | 213 kW |
| Peak Torque ( 1,400 rpm ) | 1016 N·m |
| Torque Rise | 26 % |
| Note (2) | Net power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 2,200 rpm. |
| Bore | 105 mm |
| Stroke | 135 mm |
| Displacement | 7.01 l |
| High Idle Speed | 2270 r/min |
| Low Idle Speed | 800 r/min |
| Maximum Altitude - Without Derating | 3000 m |
| Operating Weight (Tier 4 Final/Stage V) | 22522 kg |
| Operating Weight (Tier 3/Stage IIIA equivalent) | 22232 kg |
| Transmission Type | Cat Planetary Power Shift |
| Travel Speeds - Forward - First | 6.3 km/h |
| Travel Speeds - Forward - Second | 10.8 km/h |
| Travel Speeds - Forward - Third | 18.2 km/h |
| Travel Speeds - Reverse - First | 7.2 km/h |
| Travel Speeds - Reverse - Second | 12.4 km/h |
| Travel Speeds - Reverse - Third | 18.4 km/h |
| Lift/Tilt System - Circuit | Pilot operated Load Sensing valve with EH |
| Lift/Tilt System | Variable displacement piston |
| Maximum Flow at 2,200 rpm | 89 l/min |
| Relief Valve Setting - Lift/Tilt | 22000 kPa |
| Cylinders, Double Acting: Lift, Bore, Stroke | 101.6 mm x 627 mm (4.0 in x 24.7 in) |
| Cylinders, Double Acting: Left and Right Tilt, Bore, Stroke | 101.6 mm x 167 mm (4.0 in x 6.6 in) |
| Pilot System | Open center, fixed displacement gear |
| Pilot Relief Valve Setting | 21000 kPa |
| Steering System - Circuit | Pilot, Load Sensing |
| Steering System - Pump | Piston – Variable Displacement |
| Maximum Flow at 2,200 rpm | 147 l/min |
| Relief Valve Setting - Steering | 27600 kPa |
| Total Steering Angle | 84° |
| Steering Cycle Times - High Idle | 3 s |
| Steering Cycle Times - Low Idle | 8.2 s |
| Fuel Tank | 500 l |
| Diesel Exhaust Fluid Tank | 16 l |
| Cooling Systems - Tier 4 Final/EU Stage V | 81 l |
| Cooling System - Tier 3/Stage IIIA Equivalent | 73 l |
| Engine Crankcase | 20 l |
| Transmission | 56 l |
| Differential - Final Drives - Front | 65 l |
| Differential - Final Drives - Rear | 65 l |
| Hydraulic Tank Only | 75 l |
| Note | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, API CK-4, and/or ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. |
| Front | Planetary – Fixed |
| Rear | Planetary – Oscillating |
| Oscillation Angle | ±10 |
| Service Brakes | Single Disc Wet (Enclosed) 2 WHL |
| Parking Brake | Drum and Shoe, Spring Applied, Hydraulic Released |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.994 tons). |
| Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) |
| Machine Sound Power Level (ISO 6395:2008) | 112 dB(A) |
| Machine Sound Power Level (ISO 6395:2008)*** | 109 dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)*,*** | 70 dB(A) |
| Machine Sound Power Level (ISO 6395:2008)** | 107 dB(A) |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701 |
| Note (3) | ***Sound suppression equipped |
| Note (4) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed. |
| Note (5) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed. |
| Note (6) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Capacity | 2.06 m³ |
| Overall Width | 3761 mm |
| Height | 860 mm |
| Digging Depth | 222 mm |
| Ground Clearance | 802 mm |
| Maximum Tilt | 346 mm |
| Turning Radius - Outside Corner of Blade | 6437 mm |
| Turning Radius - Inside Face of Pusharm | 2520 mm |
| Weight | 800 kg |
| Total Operating Weight | 22522 kg |
| Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) |
| Machine Sound Power Level (ISO 6395:2008) | 112 dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)*** | 70 dB(A) |
| Machine Sound Power Level (ISO 6395:2008)*** | 110 dB(A) |
| Note (1) | ***Sound suppression equipped |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed. |
| Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed. |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Weight | 4409 kg |
| Outside Diameter | 1412 mm |
| Drum Diameter | 1029 mm |
| Drum Width | 991 mm |
| Tips per Row | 12 |
| Tips per Wheel | 60 |
| Replaceable | Weld On |
| Width - Over Drums | 3243 mm |
| Width Between Drums | 1261 mm |
| Tip Height | 192 mm |
| Height - Top of Beacon | 3933 mm |
| Height - Top of Cab Roof | 3650 mm |
| Height - Top of Exhaust Pipe | 3394 mm |
| Height - Top of Hood | 2616 mm |
| Height to Top of Radiator Guard | 2405 mm |
| Ground Clearance to Hitch | 365 mm |
| Ground Clearance to Transmission Guard | 375 mm |
| Ground Clearance to Bottom of Bumper | 665 mm |
| Centerline of Rear Axle to Bumper | 1990 mm |
| Hitch to Centerline of Front Axle | 1675 mm |
| Wheel Base | 3350 mm |
| Width over Platform | 3140 mm |
| Height to Top of GPS Antenna | 3701 mm |
Advantages and Features
OPERATOR COMFORT AND CONTROL
- Improved ingress/egress with an improved cab with flip up armrest.
- Keep your operators informed about machine conditions and operation with VIMS™ 3G machine monitoring system.
- Safety and visibility enhanced with standard rearview camera.
- Preferred temperature settings maintained with automatic climate control.
- Premium plus seat with leather finish containing forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening.
- Improved comfort with low operator sound levels.
- Improved spectator sound levels and optional low sound packages.
TOP-TIER SERVICE AND SUPPORT
- Easier access and in a controlled environment; electronics bay is located inside the cab.
- Focused on safety with ground level or platform access to most major components.
- Ground level: emergency shutdown, battery disconnect, and jump start.
- Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
- Electronic air inlet restriction indicator.
- Designed for ease of service and inspection.
– Hydraulic oil cooler, fuel cooler, and condenser grouped together
– Centralized grease points - Operators and technicians can resolve any problems before failure using Vital Information Management System (VIMS).
POWERFUL EFFICIENCY
- Powerful, responsive Cat® 7.1 engine is designed for maximum fuel economy and increased power density.
- Reliable performance and low emissions.
- High productivity with optional four-way tilting blade.
- Two engine options available that meet U.S. EPA Tier 4 Final and EU Stage V emission standards or U.S. EPA Tier 3 and EU Stage IIIA equivalent.
- For the Tier 4 Final and Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing SCR technology.
- Regeneration is completely automatic and does not interrupt the machine’s work cycle.
- Experience maximum responsiveness and control with Steering and Transmission Integrated Control System (STIC™).
- Conserve more fuel with the automatic engine and electrical system shutdown.
- Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points with the all new Advanced Productivity Electronic Control System (APECS) transmission controls.
- Operators experience less fatigue with throttle lock to maintain engine speed and reduce fuel burn.
PRODUCTIVITY WITH TECHNOLOGY
- Optional Cat Compact 3D mapping technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
- Cat Compaction Control with Machine Drive Power (MDP) is an energy-based measurement system that correlates compaction with rolling resistance to provide an indication of soil stiffness.
- Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
OPTIMIZE COMPACTION
- Chevron tamping tip design provides greater ground pressure, more compaction, excellent traction, and a smooth ride.
- Symmetrical tamping tip pattern results in equal compaction in forward or reverse. Tips are full perimeter and replaceable. The tip is welded to a base assembly, then welded directly to the drum.
- Each wheel has two cleaner bars to keep the drums free of carryover dirt, regardless of rolling direction so efficiency is maximized.
- The adjustable cleaner bar tips (standard or abrasive type) are heat-treated and direct-hardened cutting edge steel to increase wear life, which translates into lower operating costs.
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
POWERTRAIN
- Advanced Productivity Electronic Control System (APECS)
- Air-to-air aftercooler
- Axles - standard open front and rear
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat clean emission module (U.S. EPA Tier 4 Final/EU Stage V only)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C7.1 configured for two emissions options: Tier 4 Final/Stage V or emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
- Engine driven cooling fan – suction
- Fuel priming pump (electric)
- Fuel-to-air cooler
- Ground level engine shutdown
- Muffler (under hood) (Tier 3/Stage IIIA equivalent only)
- Radiator, unit core
- Starting aid (ether)
- Throttle lock
- Torque converter
- Transmission, planetary, with 3F/3R speed range control
-
ELECTRICAL
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance-free
- Electrical system, 24V
- Ground level lockable battery disconnect switch
- Lights, directional (rear)
- Lights, warning switched (LED strobe)
- Lighting system, (front and rear)
- Starter, electric
- Auxiliary start receptacle
-
OPERATOR ENVIRONMENT
- 12V power port for mobile phone or laptop connection
- Air conditioner
- Cab, sound-suppressed pressurized
- Cab door, sliding window (LH)
- Cab glass, laminated and tinted, rubber mounted
- Camera, rear vision
- Cat Compaction Control (ready)
- Cat Detect: Object Detection (ready)
- Coat and hard hat hooks
- Fingertip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Electro-hydraulic controls – seat mounted
- Implement hydraulic lockout
- Instrumentation, gauges: – Diesel exhaust fluid (DEF) level (Tier 4 Final/Stage V only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Light, (dome) cab
- Lunchbox and beverage holders
- Mirror, internal (panoramic)
- Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
- Precleaner (cab): – powered
- Premium plus seat containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
- Seat belt with minder, retractable, 76 mm (3 in) wide
- Steering and Transmission Integrated Control (STIC™) system with lockout
- Sun visor, front
- Transmission gear (indicator)
- Vital Information Management System (VIMS™): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill
- Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)
-
WHEELS AND CLEANER BARS
- Wheels, tamping foot
- Standard Tips
-
GUARDS
- Guards, crankcase and powertrain
- Guard, driveshaft
-
FLUIDS
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
-
OTHER STANDARD EQUIPMENT
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Emergency egress
- Fire suppression ready
- Fuel tank, 500 L (132.1 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, engine, and transmission oil coolers
- Oil change system, high speed
- Oil sampling valves
- Steering, load sensing
- Total hydraulic filtration system
- Vandalism protection caplocks
- Venturi stack
-
SPECIAL ARRANGEMENTS
- Engine Precleaners - turbine
-
FUEL SYSTEMS
- Fuel tank - non-fast
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
TECHNOLOGY PRODUCTS
- Compaction control, basic
- Product Link™: – cellular, satellite
-
OTHER ATTACHMENTS
- Sound suppression - low (required for Brazil)
- Sound suppression - EU (required for EU)
-
FLUIDS
- Antifreeze, –50° C (–58° F)
-
MISCELLANEOUS
- CE/UKCA Certification (standard where regulations require it)
- Plate – year of manufacture
-
OPERATOR ENVIRONMENT
- Cat Compact RTK Mapping (available through SITECH only)
- Mirrors, standard or heated, rearview (externally mounted)
- Radio, AM/FM/AUX/USB/BLUETOOTH®
- Radio, CB (ready)
-
WHEELS AND CLEANER BARS
- Abrasive Tips
-
POWERTRAIN
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- Axles - open front no-spin rear
-
FUEL SYSTEMS
- Fuel tank - fast fill
-
ELECTRICAL
- Lights: – Standard or LED
-
SPECIAL ARRANGEMENTS
- Engine precleaners - dual stage
-
BLADES
- Manual tilt - straight blade
- Hydraulic tilt - straight blade
